Tungsten-Based High-Density Alloys Can Efficiently Manufacture Small Precision Parts With Complex Shapes. For Small Structures Or Special-Shaped Parts That Are Difficult To Achieve With Traditional Processing Methods, MIM Can Mix Tungsten Alloy Powder With A Binder And Inject It Into The Mold To Form It In One Step, Eliminating A Lot Of Cutting Processing And Reducing Material Waste. It Is Particularly Suitable For Mass Production Of Micro Parts With High Precision Requirements.
Lead Time: < 15 Days
Tolerances: ±0.3% ~ ±0.5%
Max Part Size: Please Contact Us.
Available Tungsten Heavy Alloys at Dazao: W-Ni-Fe , W-Ni-Cu etc.
W-Ni-Fe (tungsten nickel iron)
It Can Efficiently Form Complex Precision Parts, Combining High Density With Good Mechanical Properties, And Is Suitable For Applications With High Requirements For Strength And Precision.
General W-Ni-Fe (tungsten nickel iron) Properties
|
Tensile Strength, Yield (MPa) |
Fatigue Strength (MPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
250-700 |
100-350 |
2-10 |
200-350 |
17-18.5 |
W-Ni-Cu (tungsten nickel copper)
It Has Excellent Fluidity And Can Form A Highly Dense Structure After Sintering. It Is Suitable For Mass Production Of Wear-Resistant And Corrosion-Resistant Metal Parts With Complex Shapes And High Precision Requirements.
General W-Ni-Cu (tungsten nickel copper) Properties
|
Tensile Strength, Yield (MPa) |
Fatigue Strength (MPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
400-700 |
150-300 |
3-10 |
200-300 |
16.5-18.5 |
