Stainless Steel Can Efficiently Manufacture Complex And Precise Small Parts In Metal Injection Molding (MIM). This Process Is Like Making Plastic Toys. The Stainless Steel Powder And Adhesive Are Mixed And Injected Into The Mold For Molding. It Is Particularly Suitable For Tiny Gears And Special-Shaped Structural Parts That Are Difficult To Achieve With Traditional Processing. It Can Not Only Maintain The Strength Of The Metal, But Also Save A Lot Of Cutting Processes And Reduce Material Waste.
After High-Temperature Sintering, The Stainless Steel Parts Will Restore The Density And Corrosion Resistance Close To The Traditional Process, With A Smooth Surface And Stable Dimensions. This Combination Of "Shaping + Metal Strengthening" Allows Stainless Steel MIM Products To Be Widely Used In Medical Devices, Precision Instruments And Other Fields With High Performance And Detail Requirements, While Avoiding The High Cost Restrictions Of Pure Machining.
Lead Time: < 15 Days
Tolerances: ±0.3% ~ ±0.5%
Max Part Size: Please Contact Us.
Available Stainless Steel at Dazao: Stainless Steel 303, 304, 316, 416, 17-4PH, 15-5 etc.
Stainless Steel
303
Stainless Steel 303 Is Easy To Cut And Has Good Fluidity In Metal Injection Molding (MIM) Due To Its Sulfur Content. It Is Suitable For Small Precision Parts. Its Corrosion Resistance After Sintering Is Weaker Than That Of 304 Stainless Steel.
Stainless Steel 303 Properties
|
Tensile Strength, Yield (MPa) |
Shear Modulus (GPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
240 |
77.2 |
50 |
160 |
8 |
Stainless Steel
304
304 Stainless Steel Has Good Fluidity In Metal Injection Molding (MIM), Is Suitable For Precision And Complex Parts, And Is Corrosion-Resistant, Strong And Durable After Sintering.
Stainless Steel 304 Properties
|
Tensile Strength, Yield (MPa) |
Shear Modulus (GPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
215 |
77 |
70 |
123 |
8 |
Stainless Steel
316
316 Stainless Steel Has Good Fluidity In Metal Injection Molding (MIM), Is Suitable For Precision Small Parts Processing, And Maintains High Corrosion Resistance And Mechanical Strength After Sintering.
Stainless Steel 316 Properties
|
Tensile Strength, Yield (MPa) |
Shear Modulus (GPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
205 |
74 |
40 |
187 |
8.03 |
Stainless Steel
416
Stainless Steel 416 Has Good Fluidity And Stable Sintering In Metal Injection Molding (MIM), And Can Efficiently Form Complex Precision Parts While Taking Into Account High Strength And Basic Rust Resistance.
Stainless Steel 416 Properties
|
Tensile Strength, Yield (MPa) |
Shear Modulus (GPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
275 |
83 |
30 |
156 |
7.8 |
Stainless Steel
17-4PH
Stainless Steel 17-4Ph Is Often Used For Precision Casting Of Complex Structural Parts Due To Its Excellent Casting Performance. After Casting, Solution Treatment And Aging Hardening Can Significantly Improve The Mechanical Properties And Corrosion Resistance. It Is Widely Used In Pumps, Valves, Aerospace Load-Bearing Parts And Other Fields. The Cooling Rate Of This Material Needs To Be Controlled During Casting To Avoid The Precipitation Of Delta Ferrite, And The Distribution Of Precipitation Phases Needs To Be Optimized Through Subsequent Heat Treatment To Ensure The Service Stability Of The Casting In A Corrosive Environment.
Stainless Steel 17-4PH Properties
|
Tensile Strength, Yield (MPa) |
Shear Modulus (GPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
1379 |
77.4 |
7 |
419 |
7.8 |
Stainless Steel
15-5
Stainless Steel 15-5 Can Be Used To Manufacture Complex-Shaped Parts Through Precision Molding In Metal Injection Molding (MIM). After Sintering, It Still Retains High Strength, Corrosion Resistance And Good Dimensional Stability, Making It Suitable For Precision Equipment Applications.
Stainless Steel 15-5 Properties
|
Tensile Strength, Yield (MPa) |
Shear Modulus (GPa) |
Elongation at Break (%) |
Hardness (Brinell) |
Density (g/cm³) |
|
1280 |
77 |
10 |
388 |
7.8 |
