PE (Polyethylene) Is A Common Thermoplastic. It Is Mainly Used In CNC Machining To Manufacture Corrosion-Resistant, Insulating Or Low-Friction Parts, Such As Seals, Gaskets And Customized Containers. Its Soft Properties Require The Use Of Sharp Cutting Tools And Lower Rotation Speeds, Combined With Air Cooling Or Dry Machining To Avoid Overheating And Deformation Of The Material, And Deburring Is Required After Machining. Compared With Metals, PE Has Advantages In Processing Efficiency And Cost, But Is Limited By Its Low Temperature Resistance And Is Mostly Used In Industrial Accessories, Medical Devices And Food-Grade Equipment Components That Do Not Require High Mechanical Strength.
Lead Time: < 10 Days
Tolerances: ±0.01mm ~ ±0.005mm
Max Part Size: 110 x 80 x 40 cm
Sample Time: < 3 Days
HDPE
It Is A Thermoplastic Resin With Excellent Corrosion Resistance, Low Temperature Resistance And High Temperature Resistance, Strong Chemical Stability And Good Insulation Performance. It Has High Mechanical Strength, Outstanding Impact Resistance And Tensile Resistance, Low Density, Light Weight And Easy Processing And Molding. The Material Is Non-Toxic And Odorless, Recyclable, And Widely Used In Packaging Containers, Piping Systems, Daily Necessities And Industrial Equipment.
General HDPE Properties
|
Tensile Strength, Yield (MPa) |
Elongation at Break (%) |
Hardness (Rockwell R) |
Heat Deflection Temperature (°C) |
Melting Point (°C) |
|
20-30 |
100-1000 |
40-60 |
70-90 |
120-140 |
